Switches & Crossings Pad FC10

Trackelast FC10 is a specially formulated cork-elastomer material, coloured blue and based on oil resistant polmers. Available in thicknesses up to 20mm.

FC10 is used as a baseplate pad between baseplates and steel, concrete or timber sleepers where moderate oil or grease contamination is present, and also (subject to load capacity) in bridge bearing applications.


Physical Properties

Test Method Conditions Data Units
Hardness ISO 48 68 oIRHD
Density ISO 2781 0.75 g/cm3
Tensile Strength ISO 37 >1.2 MPa
Elongation at Break ISO 37 >20 %
Abrasion Resistance Taber 3000 cycles, 500g H22 wheels <2.0 g loss
Abrasion Resistance Taber 3000 cycles, 500g H22 wheels <0.8 mm loss
Electrical Resistance BS 903 pt. C2 500v dc 6 x 1010 Ω
Static Stiffness, 10mm 0.128 - 1.128 MPa 1100 kN/mm/m2
Dynamic Stiffness, 10mm 0.128 - 1.128 MPa, 2Hz 1750 kN/mm/m2

...



...

...