Ballast Mat FC600

Trackelast FC600 ballast mat is a natural rubber bonded cork, cellular product designed with specific static and dynamic stiffness properties together with low damping, to provide optimum vibration attenuation characteristics.

FC600 is normally faced on one or both sides with a tough Geofelt protection layer. Manufactured in thicknesses up to 25mm, in a standard sheet size of 1200 x 1000mm. Other sizes can be made to suit customer requirements. Geofelt protection layer adds 3mm to the thickness of the sponge layer.


Physical Properties

Test Method Conditions Data Units
Density ISO 2781 0.45 g/cm3
Tensile Strength ISO 37 0.7 MPa
Elongation at Break ISO 37 250 %
Electrical Resistance, 25mm BS 903pt. C2 500v dc 5 x 1011 Ω
Electrical Resistance, 25mm RT/CE/S/052 500v ac, 2000Hz 3.0
Electrical Resistance, 10mm RT/CE/S/052 500v ac, 2000Hz 570
Static Stiffness, 10mm 0.02 - 0.1 MPa 60 kN/mm/m2
Dynamic Stiffness, 10mm 0.02 - 0.1 MPa, 2Hz 70 kN/mm/m2
Static Bedding Modulus, 10mm 0.06 N/mm3
Static Stiffness, 15mm 0.02 - 0.1 MPa 41 kN/mm/m2
Dynamic Stiffness, 15mm 0.02 - 0.1 MPa, 2Hz 47 kN/mm/m2
Static Bedding Modulus, 15mm 0.04 N/mm3
Static Stiffness, 20mm 0.02 - 0.1 MPa 30 kN/mm/m2
Dynamic Stiffness, 20mm 0.02 - 0.1 MPa, 2Hz 35 kN/mm/m2
Static Bedding Modulus, 20mm 0.03 N/mm3
Static Stiffness, 25mm 0.02 - 0.1 MPa 25 kN/mm/m2
Dynamic Stiffness, 25mm 0.02 - 0.1 MPa, 2Hz 28 kN/mm/m2
Static Bedding Modulus, 25mm 0.025 N/mm3
Water Absorption 0.08 g/cm3

...



...

...